Surf Fins

FAML-PG01-LG-TS-R

Overview

Al Merrick's signature template is designed for radical, progressive surfing. The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.

Suited to hollow steep waves and punchy beach breaks. Recommended for performance board with deep concaves and moderate-to-extreme rocker.

• The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.

Ideal Conditions

• Hollow steep waves, punchy beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

FMFL-PC05-LG-TS-R

Overview

• Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
• Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
• This fin provides maximum drive.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

FMRX-PC09-XL-TS-R

• Mark Richard's famous twin template produces exceptional drive and speed.
• The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set-up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.

FMFX-PC02-XL-TS-R

Overview

• Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
• Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
• The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
• Foil: With a focus on speed, the contemporary foils on the side fins significantly reduce drag and introduce flex in the upper half of the fin precisely where it’s needed.
• Surf fast, push hard, and go wild with this new 2+1 set-up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.
• Check out the DHD MF Twin surfboard developed by Mick Fanning and DHD for the new MF Twin fin

FPKL-PG01-XL-QS-R

Overview

The Performer Quad Keel is based on the theory of taking a full-size keel template and turning it into a quad set by extracting area from the back of the fin and re-shaping it into a mini quad rear.

The side fins have been designed from scratch with the leading edge inspired by the popular Modern Keel, and a trailing edge similar to the Reactor template. The low-profile quad rear is compact yet matches aesthetically the side fins, almost like a little sibling.

The smooth curves directly translate to how this set feels in the water. The robust, rounded tip and high surface area across all 4 fins ensure this set has exceptional acceleration from take-off and plenty of down-the-line speed and drive. When turning it delivers a trustworthy feel with an underlying level of response that allows you to break the line and turn in a tight arc when the wave presents steeper and more critical opportunities.

Ideally suited to smaller, weaker waves, this set is adaptable to many higher-volume hybrid tri-quad models and quad-specific models such as the Machado Seaside Fish.

• Specialty split keel quad fin set.
• High area quad keel set adds bite and control to hybrid boards with wide tails, without sacrificing pivoting capabilities.

Board Types

• Semi Keel + Stabiliser Quad Rears
• The flow of a twin. Control of a quad.

FPER-PC06-LG-RS-R

Overview

• Designed for a balance of speed, flow & response.
• Well-proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• Quad Rear (2 fins) set.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response

FAMM-PC04-MD-TS-R

Overview

• Al Merrick's template is designed for radical, progressive surfing.
• The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.

Ideal Conditions

• Hollow steep waves, punchy beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

FCAR-NG05-LG-FS-R

FFTL-PC05-LG-TS-R

Overview

• Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
• Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
• Updated PC construction featuring ultralight AirCore.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

• Accelerator: Find Control. Speed, flow and response with added control

FCAR-CC04-LG-TS-R

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start-up acceleration and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold

FPTX-PG03-XL-SS-R

Overview

• Limited Edition fin designed to compliment the JS Industries Black Baron Twin.
• Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
• Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
• Lower depth value maintains manoeuvrability and looseness off the top and through turns.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.

FMFL-PG01-LG-TS-R

FCHR-PG01-XL-SS-R

Overview

From high-performance twins to more traditional shapes, this is a perfect compliment to your twin fin. This set provides smooth and fast down-the-line speed.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.

FREA-CC03-MD-TS-R

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

FCAR-PG01-SS-RS-R

Overview

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.