Products

FPER-PC06-LG-RS-R

Overview

• Designed for a balance of speed, flow & response.
• Well-proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• Quad Rear (2 fins) set.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response

FPER-PC06-MD-TS-R

Overview

• Designed for a balance of speed, flow & response.
• Well-proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

FPKL-PG01-XL-QS-R

Overview

The Performer Quad Keel is based on the theory of taking a full-size keel template and turning it into a quad set by extracting area from the back of the fin and re-shaping it into a mini quad rear.

The side fins have been designed from scratch with the leading edge inspired by the popular Modern Keel, and a trailing edge similar to the Reactor template. The low-profile quad rear is compact yet matches aesthetically the side fins, almost like a little sibling.

The smooth curves directly translate to how this set feels in the water. The robust, rounded tip and high surface area across all 4 fins ensure this set has exceptional acceleration from take-off and plenty of down-the-line speed and drive. When turning it delivers a trustworthy feel with an underlying level of response that allows you to break the line and turn in a tight arc when the wave presents steeper and more critical opportunities.

Ideally suited to smaller, weaker waves, this set is adaptable to many higher-volume hybrid tri-quad models and quad-specific models such as the Machado Seaside Fish.

• Specialty split keel quad fin set.
• High area quad keel set adds bite and control to hybrid boards with wide tails, without sacrificing pivoting capabilities.

Board Types

• Semi Keel + Stabiliser Quad Rears
• The flow of a twin. Control of a quad.

FPTX-PG06-XL-SS-R

Overview

• Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
• Moderate sweep (rake), full tip and longer base deliver incredible drive and speed.
• Lower depth value maintains manoeuvrability and looseness off the top and through turns.
• Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.

FREA-CC03-MD-TS-R

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

FRMX-PG01-XL-QS-R

Overview

• The Seaside Quad is Rob Machado’s first signature FCS II fin template.
• Designed specifically for his Firewire Seaside model.
• This semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.
• Quad set containing 4 fins.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks, Ideally suited to smaller, weaker waves.

Board Types

• Designed to fit the FCS II Fin System.
• Excels in higher volume hybrid surfboard models.

Performance Glass (PG)

Performance Glass fins are machine cut from layers of solid fiberglass. These fins are stiff and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

FSKN-PC01-MD-RS-R

Overview

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Pair with Skindog Longboard Fin

FCS II Compatibility Infills are designed to fill the gap between the front tab of the original (dual tab) FCS fin and the front of the FCSII plug front slot.

These infills are made from high quality silicone rubber which will not damage the plugs or fins (they are also extremely durable, light and built to withstand extreme temperature and corrosive conditions).

The FCSII Compatibility Kit includes:
• Centre Compatibly Infill (x1)
• Side Compatibility Infills (x4)
• Grub Screws (x10)
• FCS Key (x1)
• Reusable zip lock bag

FKLK-BLK-001

Overview

The FCS KeyLock is a weather protected combination lock that attaches to a number of points on your car. With up to 10000 combinations, it secures your keys or anything else you can fit inside so you can surf, swim or run freely.

Features

• Hardened steel shackle coated in soft plastic.
• Weather protected combination lock with 10000 possible combinations.
• Foam backed body to avoid scratches on your car. Includes proximity key blocker.

1100 - FCS Auto Products

Safe and secure combination lock with proximity key blocker.

Overview

The FCS KeyLock is a weather protected combination lock that attaches to a number of points on your car. With up to 10000 combinations, it secures your keys or anything else you can fit inside so you can surf, swim or run freely.

Features

• Hardened steel shackle coated in soft plastic.
• Weather protected combination lock with 10000 possible combinations.
• Foam backed body to avoid scratches on your car. Includes proximity key blocker.
• Internal Dimensions (Medium): 65mm x 70mm x 25mm
• Internal Dimensions (Large): 69mm x 107mm x 40mm

Convert a single fin box to fit any FCS I fin.

10005

Overview

• FCS fin key.

• 3 Head Rotation Options
• Includes: Flat Head bit no. 7, Phillips head no. 2, Phillips Head no. 3, Custom Ezi Out Bit, and 3 x 3/32" Hex Head
• 4 FCS Hex Bits Compatible With Standard FCS Grub Screws.
• Ezi-Out Tool is Designed to Allow the Unscrewing of the Most Stubborn Screws.
• Use for any surf fin related fastenings.

WXBSE

Overview

Available in cold, cool, warm and tropical blocks with a base coat option for creating a premium textured, long-lasting, layered stick for your board.

•  Four Temperatures + Base Coat
•  100% Recycled Packaging
•  Wax Contains Natural Ingredients
•  Coconut Scented
•  Quality Beads
•  Made In The U.S.A

WXCOO

Overview

Available in cold, cool, warm and tropical blocks with a base coat option for creating a premium textured, long-lasting, layered stick for your board.

•  Four Temperatures + Base Coat
•  100% Recycled Packaging
•  Wax Contains Natural Ingredients
•  Coconut Scented
•  Quality Beads
•  Made In The U.S.A

WXTRP

Overview

Available in cold, cool, warm and tropical blocks with a base coat option for creating a premium textured, long-lasting, layered stick for your board.

•  Four Temperatures + Base Coat
•  100% Recycled Packaging
•  Wax Contains Natural Ingredients
•  Coconut Scented
•  Quality Beads
•  Made In The U.S.A

WXWRM

Overview

Available in cold, cool, warm and tropical blocks with a base coat option for creating a premium textured, long-lasting, layered stick for your board.

•  Four Temperatures + Base Coat
•  100% Recycled Packaging
•  Wax Contains Natural Ingredients
•  Coconut Scented
•  Quality Beads
•  Made In The U.S.A

FT334

Overview

Made from sugarcane-based bio-foam, the popular FCS T-3 traction pad has been reconstructed for sustainability with the same trusted performance you expect from the essential 3-piece grip.

Features

• Made with sugarcane bio-foam
• 3 piece pad
• Double diamond groove & double square groove
• Coffin arch bar
• High tail kick
• Sanded surfaces for enhanced grip
• Perforated for extra resistance

0250 - FCS Grip

The new FCS Eco Traction marries the considered design of our popular T-3 traction with materials sourced from nature.

Overview

Made from sugarcane-based bio-foam, the popular FCS T-3 traction pad has been reconstructed for sustainability with the same trusted performance you expect from the essential 3-piece grip.

Features

• Made with sugarcane bio-foam
• 3 piece pad
• Double diamond groove & double square groove
• Coffin arch bar
• High tail kick
• Sanded surfaces for enhanced grip
• Perforated for extra resistance