ALL BRANDS

FMFX-PC02-XL-TS-R

Overview

• Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
• Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
• The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
• Foil: With a focus on speed, the contemporary foils on the side fins significantly reduce drag and introduce flex in the upper half of the fin precisely where it’s needed.
• Surf fast, push hard, and go wild with this new 2+1 set-up.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.
• Check out the DHD MF Twin surfboard developed by Mick Fanning and DHD for the new MF Twin fin

FPKL-PG01-XL-QS-R

Overview

The Performer Quad Keel is based on the theory of taking a full-size keel template and turning it into a quad set by extracting area from the back of the fin and re-shaping it into a mini quad rear.

The side fins have been designed from scratch with the leading edge inspired by the popular Modern Keel, and a trailing edge similar to the Reactor template. The low-profile quad rear is compact yet matches aesthetically the side fins, almost like a little sibling.

The smooth curves directly translate to how this set feels in the water. The robust, rounded tip and high surface area across all 4 fins ensure this set has exceptional acceleration from take-off and plenty of down-the-line speed and drive. When turning it delivers a trustworthy feel with an underlying level of response that allows you to break the line and turn in a tight arc when the wave presents steeper and more critical opportunities.

Ideally suited to smaller, weaker waves, this set is adaptable to many higher-volume hybrid tri-quad models and quad-specific models such as the Machado Seaside Fish.

• Specialty split keel quad fin set.
• High area quad keel set adds bite and control to hybrid boards with wide tails, without sacrificing pivoting capabilities.

Board Types

• Semi Keel + Stabiliser Quad Rears
• The flow of a twin. Control of a quad.

FPER-PC06-LG-RS-R

Overview

• Designed for a balance of speed, flow & response.
• Well-proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• Quad Rear (2 fins) set.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response

FAMM-PC04-MD-TS-R

Overview

• Al Merrick's template is designed for radical, progressive surfing.
• The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.

Ideal Conditions

• Hollow steep waves, punchy beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

FFTL-PC05-LG-TS-R

Overview

• Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
• Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
• Updated PC construction featuring ultralight AirCore.

Ideal Conditions

• A wide range of conditions, particularly good in critical overhead waves.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-extreme rocker.

Fin Family

• Accelerator: Find Control. Speed, flow and response with added control

FCAR-CC04-LG-TS-R

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start-up acceleration and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold

FMFL-PG01-LG-TS-R

FCHR-PG01-XL-SS-R

Overview

From high-performance twins to more traditional shapes, this is a perfect compliment to your twin fin. This set provides smooth and fast down-the-line speed.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types including fish, funboard and twin fin boards.

FREA-CC03-MD-TS-R

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

FCAR-PG01-SS-RS-R

Overview

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

FPER-BK02-MD-TS-R

Overview

Made in Australia.

Created in Warriewood, NSW by locals with more than 20 years of experience, these staple Performer Glass Flex fins have been fine-tuned with precise Australian craftsmanship and a new construction that's created from 100% recycled material. 

These fins blend speed, flow, and responsive control harmoniously. Featuring a well-balanced template these fins are ideal for surfers seeking a dependable 'All Round' performance.

Constructed from 100% recycled nylon 6 polymer, these eco-friendly fins are proudly manufactured in Australia, catering to a broad range of surfers and conditions.  

• Designed for a balance of speed, flow & response.
• Well-proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

FMFL-NC01-LG-TS-R

26520-ORSD - Regular fit A classic trucker jacket lined with pile fleece for warmth and comfort; available in corduroy or denim. Made in a Fair Trade Certified™ factory. Body fabric is made with 100% organic cotton 14-wale corduroy or 64% Regenerative Organic Certified® cotton/35% recycled cotton/1% spandex foam-dyed denim, the torso is lined with 100% recycled polyester ¼in-pile fleece, and the sleeves are insulated with 80-g Thermogreen® 100% recycled polyester Two chest pockets close with flaps and snaps for security Two side-entry handwarmer pockets trimmed with twill tape protect your hands from wind and cold air Cuffs feel soft on the skin, and each secures with a single metal snap to help keep out drafts Hip length provides additional coverage and pairs nicely with a hip belt or a harness Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor 1094.29 g (38.6 oz) 38.6 Body: 8.9-oz 100% organic cotton 14-wale corduroy; (ORSD only) 12-oz 64% Regenerative Organic Certified® cotton/35% recycled cotton/1% spandex foam-dyed denim. Torso lining: 8.7-oz 100% recycled polyester ¼in-pile fleece. Sleeve lining: 2.2-oz 100% recycled polyester taffeta with a DWR (durable water repellent) finish. Sleeve insulation: 80-g Thermogreen® 100% recycled polyester. DWR finish is made without PFCs (perfluorinated chemicals). Sleeve lining fabric is certified as bluesign® approved. Made in a Fair Trade Certified™ factory